Yamaha RIVAGE PM10 Operation Manual page 125

System Setup  BUS SETUP
BUS SETUP
BUS SETUP (Basic settings for MIX buses and MATRIX buses)
This section explains how to edit the basic settings for MIX buses and MATRIX buses, such as
switching between stereo and monaural, or changing the bus type.
The settings you make in the following procedure are saved as part of the scene.
1.
Press the SETUP button to access the SETUP screen.
2.
Press the BUS SETUP button to open the BUS SETUP popup window.
This window includes several pages, which you can switch between using the tabs located at
the top of the window.
3.
Press the BUS SETUP tab.
The screen contains the following items.
4
1 2
1
SIGNAL TYPE switch buttons
Enable you to select how signals are processed for every adjacent pair of buses. You can select
either STEREO (stereo signal) or MONOx2 (monaural signal x 2).
2 BUS TYPE select buttons
Enable you to select the bus type for every adjacent pair of buses. You can select VARI (variable
send level) or FIXED (fixed send level).
3 PAN LINK button
This button will be displayed only if SIGNAL TYPE is STEREO and set to VARI.
If the button is on, the signals routed to the corresponding channels will link with the TO
STEREO pan setting.
4 Tabs
Enable you to select MIX1-36, MIX37-72, or MATRIX bus.
125
CONTENTS FUNCTION MAP
3 1 2
RIVAGE PM10 Operation Manual
3