Yamaha RIVAGE PM10 Operation Manual page 241

Plug-ins  Controlling the parameters of a plug-in
5 INPUT knob
Adjusts the input gain. As the input increases, the delay's drive amount also increases.
If the input level is lower, you will get a cleaner sound. If the input level is higher, you will get a
deeper delay sound.
6
BASS knob
Adjusts the low frequency range level at the input stage.
7
TREBLE knob
Adjusts the high frequency range level at the input stage.
8
DELAY knob
Adjusts the delay time.
9
FEEDBACK knob
Adjusts the feedback amount of the delay signal.
)
FREQUENCY knob
Adjusts the frequency of modulation.
!
DEPTH knob
Adjusts the depth of modulation.
@
MIX knob
Adjusts the mix balance between dry and delay sounds.
■ Max100
Max100 reproduces a classic phaser that appeared in the second half of the 1970s and continues to
be popular today. With just four modes and a speed knob, it produces a variety of distinctive phase
sounds.
1
MODE knob
Switches the tonal character. There are four types that differ in modulation amplitude and
feedback amount.
2 SPEED knob
Adjusts the modulation speed.
3 FOOT switch
Switches the effect on/off.
241
CONTENTS FUNCTION MAP
1 2
3
RIVAGE PM10 Operation Manual