Yamaha RIVAGE PM10 Operation Manual page 118

System Setup  SYSTEM CONFIG
SYSTEM CONFIG popup window
1 I/O rack select popup buttons (M1–M8)
If you press one of these buttons when an I/O rack is not mounted, the I/O SELECT popup
window will appear, allowing you to select the I/O rack that you want to use. If you press this
button when an I/O rack is already mounted, the I/O rack settings window will appear
(page 119).
Devices being edited offline are indicated as "VIRTUAL" in yellow.
3.
Press the I/O rack select popup button to access the I/O SELECT popup window.
1
118
I/O SELECT popup window
4.
Select the I/O rack (RPio622 or RPio222) that you want to use, and press the OK
button.
You will return to the SYSTEM CONFIG popup window. To cancel, press the CANCEL
button.
If you want to add another I/O rack, repeat steps 3–4.
CONTENTS FUNCTION MAP
RIVAGE PM10 Operation Manual