Yamaha RIVAGE PM10 Operation Manual page 198

CH Parameter  SENDS TO/SENDS FROM
■ Using the copy function in the HPF/EQ popup window or the
DYNAMICS1/2 popup window
The following table lists the controllers and corresponding parameters.
Screen Controller
HPF/EQ popup window EQ type select button
DYNAMICS 1/2 popup window Dynamics processor type
select button
INSERT/D.OUT popup window FOLLOW setting buttons
(12CH/D.OUT)
1.
In the HPF/EQ popup window, while pressing and holding down the [SHIFT] key,
press the dynamics processor type select button to display the PARAMETER SET
popup window.
1
6
The window contains the following items.
1
Copy source
Indicates the type to copy. Select the type as needed.
2
Copy destination select knob
Selects the channel number as the copy destination.
Parameter to copy
EQ Type
Dynamics processor type
To follow the FADER/ON/
DCA settings.
3
2
4
5
3 SELECT ALL button
Selects all channels as the copy destination.
4 REVERT button
Cancels the SELECT ALL button setting.
5
EXECUTE button
Copies the selected parameter and closes the window.
6
CANCEL button
Aborts the copy operation and closes the window.
2.
Select the copy destination, and then press the EXECUTE button.
The parameter is copied to the selected channel number. To abort the copy operation, press the
CANCEL button instead of the EXECUTE button.
198
CONTENTS FUNCTION MAP
RIVAGE PM10 Operation Manual