Yamaha RIVAGE PM10 Operation Manual page 73

Bay  Selected channel concepts
A [SEL] key is used to select the corresponding channel for the Selected Channel section
(hardware).
However, the [SEL] keys can also be linked to on-screen selected channels to assign channels to a
DCA or mute group.
Selecting channels on screen
In addition to the Selected Channel section (hardware), the touch screen in each bay is useful for
controlling parameters for one specific channel. One specific channel selected on each touch screen
is called an "on-screen selected channel. "
You can select a channel on screen in one of the following ways:
1 Press either side (+/– buttons) of
the selected channel indication in
the upper-left of the screen.
Press the left side (–) of the selected
channel indication to select the preceding
channel. Press the right side (+) of the area
to select the next channel.
2 Press the channel name area
located at the bottom of the screen.
Press the channel name repeatedly to
switch the selected channel on screen.
If you switch fader layers in the meter area,
the channel name area will change the
indication accordingly. In this way, you
can access any channel on screen.
NOTE
If you use the [FADER BANK]>[SEL] LINK function specified in the PREFERENCES window,
you will be able to automatically switch to the selected channel in each bank (a channel selected
most recently) while switching between fader banks
1
2
(page 319).
On-screen On-screen
selected channel selected channel
(L) (C)
On-screen selected channel displayed on an external monitor
The on-screen selected channel on an external monitor screen also serves as the on-screen selected
channel for bay R. In this way, if you use the external display and a USB mouse, you will be able to
operate channel parameters on bay R in same way you do on bay L and bay C.
On-screen On-screen
selected channel selected channel
(L) (C)
73
CONTENTS FUNCTION MAP
On-screen
selected channel
(R)
RIVAGE PM10 Operation Manual