Yamaha RIVAGE PM10 Operation Manual page 239

Plug-ins  Controlling the parameters of a plug-in
8 Lo Xover button
Adjusts the crossover frequency between the low and low-mid frequency ranges of the reverb
tail.
9 Mid Xover button
Adjusts the crossover frequency between the low-mid and middle frequency ranges of the
reverb tail.
)
Hi Xover button
Adjusts the crossover frequency between the middle and high frequency ranges of the reverb
tail.
! Reverb Type button
Selects the type of reverb effect.
@ Reverb Diffuse button
Adjusts the diffusion for the decay time.
# Modulation Type button
Selects the type of modulation.
$ Modulation Rate button
Selects the rate of modulation.
% Modulation Depth button
Selects the depth of modulation.
^ Dry Level button
Adjusts the level of the dry signal at the output stage.
■ NonLin2
NonLin2 is a processor that emulates an effect reverb made by TC Electronic that enables the user to
adjust an envelope.
It provides vocal ambience, drum sound, reverse reverb, and a Twist effect.
1 2
5
7
9 )
1 Pre Delay button
Adjusts the delay of the envelope.
2 Attack button
Adjusts the attack time of the envelope.
3 Hold button
Adjusts the hold time of the envelope.
4 Release button
Adjusts the release time of the envelope.
5 Style list
Selects the basic reverb style.
6 Diffuse button
Adjusts the diffusion (spread) for the selected reverb style.
239
CONTENTS FUNCTION MAP
@
3 4
3
$ %
8
! & *
RIVAGE PM10 Operation Manual
#
^