Yamaha RIVAGE PM10 Operation Manual page 62

Part Names & Functions  Top panel of the control surface
UTILITY section
1 POWER Indicator
Lights when AC power to the unit is ON. If both power
switches A and B are turned on, this indicator will light
1
green. If either power switch A or B is turned on, it will light
red. If the RIVAGE PM 10 system is not started, it will light
orange.
2
2
USB port
Enables you to connect a USB device (such as a mouse,
3
keyboard, or USB flash drive). Use a USB flash drive to store
the system's internal data and to load the stored data into
4
the system.
■ Supported USB flash drive format
The FAT16 and FAT32 formats are supported.
■ Write Protection
5
Some USB flash drives feature write protection that
prevents data from being erased inadvertently.
6
If your USB flash drive contains important data, we suggest
that you use write protection to prevent accidental erasure.
7
On the other hand, you will need to make sure that your
USB flash drive's write-protect setting is turned off before
you save data onto the USB flash drive.
8
For the latest information on USB flash drives that can be
used with the system, visit the Yamaha Pro Audio website at:
http://www.yamahaproaudio.com/
NOTICE
9
Do not remove the USB flash drive from the USB connector
or turn off the power to the unit while the unit is accessing
data, e.g., saving, loading or deleting data. Doing so may
damage your flash drive, or may damage the data in the unit
or on your media device.
3 RECORDING port
Enables you to connect a USB flash drive to record and play back audio files. Supported file
formats include WAV and MP3.
For the latest information on USB flash drives that can be used with the system, visit the
Yamaha Pro Audio website at:
http://www.yamahaproaudio.com/
4 [SYSTEM] key
Press this key to display information about the RIVAGE PM10 system on the touch screens.
Press and hold down the key for two seconds or longer to shut down the control section of the
console (page 78). Be sure to shut down before turning off the power to the unit.
5 TALKBACK jack
This is a balanced XLR-3-31 jack to which a talkback mic can be connected.
6 +48V indicator
Lights up when +48V phantom power is supplied to the TALKBACK jack.
7 TALKBACK [LEVEL] knob
Adjusts the input level of the mic connected to the TALKBACK jack.
8 TALKBACK [ON] key
Switches the Talkback function on or off.
9 MONITOR A/B [LEVEL] knobs
Adjust the output level of the monitoring signals.
62
CONTENTS FUNCTION MAP
RIVAGE PM10 Operation Manual