Yamaha RIVAGE PM10 Operation Manual page 66

Part Names & Functions  Top panel of the control surface
1 2
3
4
5
6
7
8
9
)
@
!
#
1
PIN indicator
Lights when the Pinning function for the
[TOUCH AND TURN] knob is ON.
(This feature will be supported by a future
update.)
2 [TOUCH AND TURN] knob
Controls the parameter of the knob you are
touching on the touch screen.
3 Channel strip encoder display
Indicates the function that has been assigned
to the channel strip encoder.
4
UP [U]/DOWN [D] keys
Enable you to select the function that you want
to control using the channel strip encoder.
5 [SHIFT] key
Combine with another key to perform a
certain function.
The following table shows examples of using
the [SHIFT] key combined with another key.
Procedure Function
Press and hold down To switch cues as the
the [SHIFT] key and channel's send
[CUE] key. destination.
(A ➝ B ➝ A&B ➝ A)
6 [SENDS ON FADER] key
Turns SENDS ON FADER mode on and off.
7 INPUT [1-72]/[73-144] keys
Enable you to select an input layer.
8
OUTPUT [MIX]/[MATRIX] keys
Enable you to select an output layer.
9 [DCA] key
Enables you to select a DCA layer.
) CUSTOM [1]/[2] keys
Enable you to select a custom layer. You can assign custom faders of two banks (total of 12
layers) to each custom layer.
! Layer display
Indicates the selected layer.
@ Layer Select [A]/[B]/[C]/[D]/[E]/[F] keys
Enable you to select a layer.
# [HOME] key
Recalls a group of settings. Press and hold down this key to store the following settings:
• Current screen
• Selected channel/parameter on the screen
• Selected layer
66
CONTENTS FUNCTION MAP
RIVAGE PM10 Operation Manual