Yamaha RIVAGE PM10 Operation Manual page 108

System Setup  SYSTEM CONFIG
ROUTING MODE switch popup window
This window enables you to switch the routing mode for HY slot 2.
MODE 1: All input signals of the RY slots and MY slots are split for output to the HY SLOT 2
output.
MODE 2: You can patch mixing output signals to the HY SLOT 2 output via the TWINLANe
network, in the same way as the RY slots and MY slots.
4.
Press the TWINLANe assignment button of the slot for which you want to make
settings, and assign the channels to the TWINLANe network.
The number of selected channels assigned is shown on the button. For an HY slot, a window in
which you can make settings in 16-channel units will appear.
If you press a TWINLANe assignment button that is already assigned, an "x" mark (
appears, indicating that the assignment is canceled.
If you press a TWINLANe assignment button that is not assigned, a checkmark (
appears, indicating the assignment.
5.
Press the APPLY button to apply the channel settings to the TWINLANe
network.
6.
When you finish making assignments, press the × button to close the
I/O rack settings popup window.
If channels are assigned, and you press the × button without pressing the APPLY button, the
following confirmation screen will appear.
If you press OK, you will return to the SYSTEM CONFIG popup window without applying the
assignments.
If you press CANCEL, you will return to the I/O rack settings popup window.
)
)
108
CONTENTS FUNCTION MAP
RIVAGE PM10 Operation Manual