Table of Contents
Advertisement
2.1.7
EN100-Module
2.1.7.1 Description
The EN100-Module enables integration of the 7SC80 in 100-Mbit communication networks in control and au-
tomation systems with the protocols according to IEC 61850 standard. This standard permits uniform commu-
nication of the devices without gateways and protocol converters. Even when installed in heterogeneous envi-
ronments, SIPROTEC 4 relays therefore provide for open and interoperable operation. Parallel to the process
control integration of the device, this interface can also be used for communication with DIGSI and for inter-
relay communication via GOOSE.
2.1.7.2 Description
The EN100-Module enables integration of the 7SC80 in 100-Mbit communication networks in control and au-
tomation systems with the protocols according to IEC 61850 standard. This standard permits uniform commu-
nication of the devices without gateways and protocol converters. Even when installed in heterogeneous envi-
ronments, SIPROTEC 4 relays therefore provide for open and interoperable operation. Parallel to the process
control integration of the device, this interface can also be used for communication with DIGSI and for inter-
relay communication via GOOSE.
The Feeder Automation Controller 7SC80 can be used with an EN100-Module with 2 IEC 61850 channels.
2.1.7.3 Information List
No.
Information
009.0100 Failure Module
009.0101 Fail Ch1
009.0102 Fail Ch2
SIPROTEC, 7SC80, Manual
E50417-G1140-C486-A1, Release date 12.2011
Type of In-
formation
IntSP
Failure EN100 Module
IntSP
Failure EN100 Link Channel 1 (Ch1)
IntSP
Failure EN100 Link Channel 2 (Ch2)
Functions
2.1 General
Comments
53
Advertisement
Table of Contents
