Mass-Storage Device Mode - HIMS Braille Sense U2 User Manual

3.2.44 Mass-storage device mode

You can choose whether the Braille Sense U2 will be used as a mass-
storage device mode or not when the Braille Sense U2 is connected to
the personal computer (PC) via USB cable. The shortcut key for this
option is "d (dots 1-4-5)" with the default set to "On." The "Space" key
toggles off/on. If you keep default setting, PC recognizes the Braille
Sense U2 as the mass-storage device mode automatically when
connecting the Braille Sense U2 to PC.
If you select "Off," PC doesn't recognizes the Braille Sense U2. In this
case, if you want to connect the PC to the Braille Sense U2, you need to
install and execute the Active Sync program in the PC. You can
download the Active Sync program from the Microsoft website for free.
If you have changed the setting, press "Enter" key to save the setting.
You can also "tab ("Space-4-5")" or "shift-tab ("Space-1-2")" to the
"Confirm" button, and press "Enter." If you do not want to save the
setting, "tab ("Space-4-5")" or "shift-tab ("Space-1-2")" to the "Cancel"
button, and then press "Enter." You can also cancel saving the setting by
pressing "Space-z (dots 1-3-5-6)" or "Space-e (dots 1-5)."