Find - HIMS Braille Sense U2 User Manual

submenus: "Find," "Find Again," "Replace," "Go To Location," "Go to
Previous Page," "Go To Next Page," "Set Mark," "Go to Mark," "Go To
Previous Document," and "Go To Next Document."

5.3.1 Find

The find function allows you to search for text in a document. Once the
text is found you will be taken to that position in your document. To
execute this command, press "Space-m (dots 1-3-4)" or "F2," and move
to "Go To" by pressing "Space-4" and press "Enter" on "Go To." Then,
select "Find." You will be able to navigate the "Go To" menu with
"Space-1" or "Space-4." Otherwise, you can press "f (dots 1-2-4)" in the
"Go To" menu, which is the shortcut. While editing a document, pressing
"Space-f (dots 1-2-4)" will activate the "Find" command. If "Find" is
executed, the dialog box is displayed. This dialog box consists of "Text
to find," "Search direction," "Match case," a "Confirm" button, and a
"Cancel" button. You can move from one field to the next field by
pressing "tab ("Space-4-5")" or "shift-tab ("Space-1-2")".
1. Text to find
The first field in "Find" is "Text to find." In this window, you can type in
the text that you want to find. If you want to find the text immediately,
press "Enter." However, if you want to set other fields in the dialog
box, press "tab ("Space-4-5")" to move to the next field.
2. Search direction
The next field is "Search direction." The default direction is "Forward."
If you would like to change the search direction, you should press
"Space." Pressing "Space" will toggle between "Forward" and
"Backward". After you type in the text to be found, and set the
searching direction, press "Enter" if you want to find the text
immediately.
3. Match case
The next field is "Match case." This field display only when you
execute the "Find" command in text file. This field does not display in
Braille file. The default value is "No." If you want to change the value,
press "Space." Pressing "Space" will toggle between "No" and "Yes."