Adsl Setup - HIMS Braille Sense U2 User Manual

"Space." After completing each item, you can move to the next item by
pressing "tab ("Space-4-5")"." Finally, with "Modem speed" completed,
you can press "Enter" to save your registration. Before saving it, you can
cancel your choices by moving to "Cancel" by pressing "tab ("Space-4-
5")"," and press "Enter" on it.
"Modify" is used to modify the connect group. You can do this by moving
to what you want to select in the "connect list," and then press "Enter."
You can also press "tab ("Space-4-5")" to locate "Modify." Otherwise, you
can press "Enter-m (1-3-4)" on the "Connect name" in the "connect list"
directly. "Modify" has the same items as "Add," and you use the menus
in the same way.
In "Delete," if you want to delete an item, you can move to what you
want to delete in the "connect list," and then press "Enter" on "delete."
Use "tab ("Space-4-5")" to move between the items. Or, you can delete
an item by pressing "Space-d (dots 1-4-5)" on what you want to delete in
the "connect list."
If you want to exit the "Modem setup," you can press "Space-z (dots 1-3-
5-6)," or you can press "Enter" on "Close" by moving to it by pressing
"tab ("Space-4-5")".

17.10.4 ADSL Setup

If you want to connect the Braille Sense U2 to the Internet via a DSL
connection, you should use the ADSL setup. First, you should plug in a
LAN cable to the Braille Sense U2's LAN port. If you press "Enter" on
"Setup internet," you will first see "CB LAN 1/5." Then, go to ADSL by
pressing "Space-4" repeatedly. Press "Enter" on "ADSL." It contains the
following controls: connect list, default, add, modify, delete, and close.
You can move between the controls by pressing "tab ("Space-4-5")" or
"shift-tab ("Space-1-2")". Within each control, you can move item by item
by pressing "Space-4" or "Space-1."
In the "connect list," you will see the added connect names. Select one
by pressing "Enter" on it. In "Default," you can make one of the added