Fm Radio; Listening To Fm Radio Via Internal Speakers - HIMS Braille Sense U2 User Manual

10. FM Radio

In order to use "FM Radio" program in the Braille Sense U2, please
connect the headphone to the headphone jack of the Braille Sense U2.
The headphone connected to the Braille Sense U2 will work as a radio
antenna.
In the program menu, please press scroll buttons to move to the "FM
Radio" and press "Enter," or just press "r (dots 1-2-3-5)" in order to
execute FM Radio program. Once the FM Radio program is executed,
your Braille Sense U2 will announce the radio frequency. If you had
executed the FM Radio program, the Braille Sense U2 will tune to the
frequency that you listened to and announce the frequency.
For your reference, the frequency range of the Braille Sense U2 is from
87.5MHz to 108MHz.

10.1 Listening to FM Radio via internal speakers

When you execute FM Radio program after connecting the headphone
to the headphone jack, sound from the radio will output through the
headphone. If you want to listen to the radio through not only the
headphone but also internal speakers, please set as follows;
1) Press "Space-X (dots 1-3-4-6)" or "X (dots 1-3-4-6)" while
outputting sound from the radio, it enables to output through the
internal speakers.
To set enabling the internal speaker using Menu as follows.
1) Press Space-m (dots 1-3-4) to call the FM Radio menu and
press "Enter" at "File" menu and then press "Enter" at "Settings."
2) Or without calling menu, press "Enter-e (dots 1-5)" in order to
call the dialog box.
3) Then the dialog box will be opened and "Internal speaker: No" is
announced in voice.
4) Press "Space" once to switch from "No" to "Yes" and press
"Enter."