Print Paragraph Layout - HIMS Braille Sense U2 User Manual

1. Indent first line
This indents the first line of the paragraph as designated by the
number of characters. The default value is set to 0. In order to change
this setting, type in the number of characters to be indented on the
"Indent first line" setting item. Press the down scroll button or "Space-
4" in order to move to the next setting item.
2. Indent all lines except the first line
This indents all the lines of the paragraph, except the first line of the
paragraph as designated by the number of columns. If you want to
indent all of the text, except for the first line, by typing in a number.
You can make the indent as big as you want it by changing the
number of columns, which will indent all lines, except for the first line.
Press "tab ("Space-4-5")" in order to "Confirm" and "Cancel." If you
want to change the setting of a previous item, move to it by pressing
"Space-1," and change it. The default is set to "0.)
3. Confirm / cancel
In order to apply changes, you need to press "Enter" when "Confirm"
is displayed. If you want to exit from a setting without changing it, you
should press "Enter" when "Cancel" is displayed. You must press "tab
("Space-4-5")" or "shift-tab ("Space-1-2")" to get to the Confirm and
Cancel buttons.

5.5.4 Print Paragraph Layout

You can set the layout of the current paragraph for printing on an ink
printer. In order to set "print paragraph layout," press "Space-m (dots 1-
3-4)" or "F2" while you are editing a document, and select "Layout," or
press "l (dots 1-2-3)" (which is the short cut), and select "Print Paragraph
Layout." Or, press "BackSpace-2-3-4-6," which is the hot key for "Print
Paragraph Layout." This setting applies only to the paragraph that you
are on when the setting is changed. This setting change does not apply
to other paragraphs. You can navigate the menu items by pressing
"Space-1" or "Space-4," and you can move to "Confirm" or "Cancel" by
pressing "tab ("Space-4-5" or "F3")." You can skip an item by pressing
"Space-4" if you do not want to change the default setting.