Recording Setting Dialog Box - HIMS Braille Sense U2 User Manual

box will be exited automatically. If you press "Enter" at "Cancel" button or
press "c (dots 1-4)", the recorded file will not be saved and exit the
dialog box.
During recording, you cannot change the channel and frequency.
During listening to the radio, you can record without calling the record
dialog box by pressing the "record" button on the front panel. Before you
use the "record" button out of the audio buttons on the front panel,
please set the audio mode switch to the FM radio mode. If you press the
"record" button, the record dialog box will be opened and recording will
start.
If you press "stop" button on the front panel during recording, recording
will stop and the recorded audio file will be saved. If you press the
"pause" button during recording, the "pause" button will be changed to
the "continue" button. Please press the "continue" button to continue
recording. Pressing "previous" button or "next" button will move among
controls in the record dialog box.

10.4.1 Recording Setting Dialog Box

If you press enter on "Record Settings" in the "File" menu, or press
"Backspace-s (dots 2-3-4)" , the Braille Sense U2 will display the
"Record Settings" dialog box, which contains "Recording type," "Sample
rate" option, "Bitrate" option(only when recording type is mp3), "Bits per
channel" option(only when recording type is wav), "Preset" option,
"Record folder," "Confirm" button and a "Cancel" button. You can move
between controls by pressing "tab ("Space-4-5")" or "shift-tab ("Space-1-
2")". And you can move between options by pressing "Space-1" or
"Space-4."
The "Recoding type" allows you to set the default file type of recording
file. Its default value is set to "mp3." You can select between "wav" and
"mp3" the value by pressing "Space."