Modify Table - HIMS Braille Sense U2 User Manual

(Space-4-5)" repeatedly to move to the "Delete field" button and press
"Enter."
To change the order of a field, which is in your table, you can move to
the field that you want to change. This can be done when you are in the
"registered fields" list. Once you are on the field, press "p (dots 1-2-3-4)"
or "n (dots 1-3-4-5)." Or you press "tab (Space-4-5)" and enter on a
"Previous field" button or "Next field" button.
Then, the "Add Table" dialog box will be closed, and the "table name" list
box will be shown again. The newly created table will be added to this
list, and "address book 1/1" will be shown in the list. To close the "Table
Manager" dialog box, press "tab (Space-4-5) to move to the "Close"
button, and press "Enter." Or you can just press "Space-z (dots 1-3-5-6)"
to close the dialog box. Then, the "Search Records" dialog box will be
opened, and the "name" field, the first field of the "address book" table,
will be shown. Here, you can type the name you want to search for.

14.1.2 Modify Table

"Modify table" is used to modify the name or structure of a registered
table. It contains the same controls as in the "Add Table" dialog box. To
modify a table, press "Space-m (dots 1-3-4)" or F2 to open the menu,
and press "Enter" on "Table Manager." Or you can just press the hotkey
for "Table Manager", "Enter-t (dots 2-3-4-5)." The "table name" list will be
focused when the "Table Manager" dialog box is opened. Press "Space-
1" or "Space-4" to move to the table that you want to modify, and press
"m (dots 1-3-4)," the shortcut key for the "Modify table" button. Or you
can press "tab (Space-4-5)" repeatedly to move to the "Modify table"
button, and press "Enter." Then, a dialog box where you can modify the
table will appear. This table is same as the "Add Table" dialog box. The
only difference is that the "Table name" edit box, and "registered fields"
list contain the information already stored in the table. You can not
change the name of table.
If you want to add additional fields, press "tab (Space-4-5)" to move to
"Add field" and press "Enter." And then type in the new field name and