Basic Functions Of The Braille Sense U2; How To Use The Commands; Messages - HIMS Braille Sense U2 User Manual

2. Basic Functions of the Braille Sense U2

2.1 How to Use the Commands

All of the commands that you will use on the Braille Sense U2 are
comprised of different combinations of the Braille keys. In this user
manual, the "-" sign is used to indicate key combinations. For example,
"Space-z (dots 1-3-5-6)" indicates that the user should press "space"
and "letter z (dots 1-3-5-6)" simultaneously and then release them at the
same time. You will also find expressions like "Space-1-3-5-6" in this
manual. This means that the spacebar with dots 1, 3, 5, and 6 should be
pressed and released simultaneously. You can execute most commands
by pressing "Enter" button. If you want to cancel the execution of any
command, and return to the previous status, press "Space-z (dots 1-3-5-
6)." "Space-z (dots 1-3-5-6)" is a very important command to remember,
as it will allow you to back out of programs and menus, when you may
have pressed keys that you did not mean to press.

2.1.1 Messages

If you have setup an appointment in the Braille Sense U2, schedule
Manager, you will be notified of your appointments by the Braille Sense
U2 on the day of your appointment. When you are notified of an
appointment, you can interact with the Schedule Manager as you
normally would. In order to exit from the Schedule Manager, you should
press "Space-z (dots 1-3-5-6)" or "Space-e (dots 1-5)," and launch
another program.
If you do not want to be alerted of "today's schedule" when you turn on
the Braille Sense U2, you should turn off the "Check today's schedule"
option.
If you turn off the Braille Sense U2 while another program is opened,
and then you turn it on again, the Braille Sense U2 will tell you the name
of the program that was running on the Braille Sense U2 when you
turned it off. If you turn off the Braille Sense U2 while you are using the