Bluetooth Service List - HIMS Braille Sense U2 User Manual

item while in the menu by pressing "z (dots 1-3-5-6)" while you are in the
Bluetooth Device List menu or at any time without calling up the menu
by pressing "Space-z (dots 1-3-5-6)."

13.2 Bluetooth Service List

Once you know which remote Bluetooth device you want to connect to,
press "Space-1" or "Space-4" to navigate to the device you want to
connect to in the Bluetooth Device List, and then press "Enter" on the
device name. You will then hear, "Scanning for service. Please wait..."
Please note that no keys will work during scanning the devices. The
Braille Sense U2 will begin scanning services that are available from the
remote Bluetooth device. The Braille Sense U2 supports the services:
LAN, FTP, ActiveSync, Serial port, Headset and Bluetooth DUN. In order
to access all of these functions, you must make sure that the remote
Bluetooth device is in Discoverable mode, and that all services are
enabled. It is possible to have certain services enabled on your remote
Bluetooth device, while having other services that are disabled. For
example, you could have LAN and FTP enabled, while having
ActiveSync and Serial Port disabled. If this is the case, then the Braille
Sense U2 will only display LAN and FTP.
Once the Braille Sense U2 has found all of the available services, it will
display the services in a list in the following format: "service name xx/yy"
where xx is the number of the service that you are on, and yy is the
number of total available services. You can move through the available
services by pressing "Space-1" or "Space-4." You can press
"Backspace" to return to the Bluetooth Device List.
Once the Braille Sense U2 has finished searching service, you can
access the menu by pressing "Space-m (dots 1-3-4)" or by pressing
"F2." The "Bluetooth Service List menu" has the "Device Name," "Open
FTP," "Disconnect" and "Exit." You can navigate the menu items with
"Space-1" or "Space-4."