Open - HIMS Braille Sense U2 User Manual

URL" edit window, or press "Enter-u (dots 1-3-6)" while the Web browser
is open. When "Open URL" is executed, the edit window for an address
will be displayed. On the Braille display, you will see the address of the
current page. You can enter a new web page address that you want to
connect to. You need to enter the new address in computer Braille such
as "www.google.com." Then, press "Enter."
You can check the addresses that have been entered previously by
pressing the down arrow ("Space-4"). Move to the address that you want
to open using the up arrow ("Space-1") or the down arrow ("Space-4"),
and press "Enter" when the desired URL is displayed on the Braille
display. You can go to a specific web page either by typing in a new
address, or by selecting one of the previously entered addresses.
If the Braille Sense U2 cannot connect to the desired web page, and it
only shows progress on the Braille display, press "BackSpace-enter" to
stop connecting, and call up "Open URL" again. You can type in the
address and try to connect again. You can stop the Web browser from
connecting by pressing "Space-z (dots 1-3-5-6). Sometimes, this can
happen due to network or Internet problems.

11.1.2 Open

In order to enter into "Open," press "Space-m (dots 1-3-4)" or "F2" to call
up the "menu," and press "Enter" on "File." Go to "Open" by pressing
"Space-4," and press "Enter." Or, you can press "Enter-o (dots 1-3-5)"
when the Web browser is active. Then the "Open dialog box" will show
up.
"Open dialog box" consists of "file list," "File name," "Type," "Confirm"
button and "Cancel" button. You can move among those controls by
pressing "tab (Space-4-5)" or "shift-tab (Space-1-2)." When the "Open
dialog box" is opened, "File name" will be focused. Type in a file name,
and press "Enter," or press "shift-tab ("Space-1-2")" to move to the file
list. Select the desired file name, and press "Enter."