Save As - HIMS Braille Sense U2 User Manual

If you execute "Save" after you edit a document that was opened using
the "Open" function, the Braille Sense U2 will save the document with
the same file name without using a dialog box. After saving a document,
it will return to document edit status.
When you have several documents open, you can save the current open
document, by pressing "Space-q (dots 1-2-3-4-5)." This will close the
document, save it, and return to the previous document.
Note:
1) PDF and Epub file cannot be saved as a same file type. When
trying to save, it will execute "Save as" and needs to be saved
different file type.
2) When saving the "rtf" and "doc", the file formatting will be lost and
saved.

5.1.4 Save As

The "Save As" option is used to save a document as a different file
name, on another disk drive, or as a different file type. If you want to
execute this command, press "Space-m (dots 1-3-4)," and then press
"Enter" when the "File" menu is displayed. Move to "Save As" by
pressing "Space-4." Then, press "Enter." Another way is to press
"Space-s (dots 2-3-4)," which executes the "Save As" command in the
word processor.
If you execute "Save As," the "Save as dialog box" is displayed. This
dialog box is almost the same as the "Open" dialog box. It consists of
"file list," "File name," "Type" (representing the file format), a "Confirm"
button, and a "Cancel" button. If the dialog box is opened, "File name:" is
displayed. You can move from one tab to the other tab by pressing "tab
("Space-4-5")" or "shift-tab ("Space-1-2")".
If you execute "Save As" when you are editing a document that you
opened, the displayed file name, file format, and the folder are the same
as those of the file that you opened. When executing "Save as", "PDF"