Eight Dot Mode; View/Input The Grade Of Braille - HIMS Braille Sense U2 User Manual

"shift-tab ("Space-1-2")" to the "Confirm" button, and press "Enter." If you
do not want to save the setting, "tab ("Space-4-5")" or "shift-tab ("Space-
1-2")" to the "Cancel" button, and then press "Enter." You can also
cancel saving the setting by pressing "Space-z (dots 1-3-5-6)" or
"Space-e (dots 1-5)."
Note that there are three types of cursors:
1. "dots 7-8"
2. blinking "dots 7-8"
3. blinking "dots 1-2-3-4-5-6-7-8"
The blinking "dots 7-8" will be displayed when you are in the "overwirte
mode" in the word processor. The blinking "dots 1-2-3-4-5-6-7-8" will
appear when you are using the "Start Selection" setting in the word
processor and when you are in an edit box. In all other situations, the
cursor will be displayed as "dots 7-8."

3.2.3 Eight Dot Mode

You can choose to use a 6-dot-Braille or 8-dot-Braille display when
using ASCII text mode. The shortcut key is "e (dots 1-5)." By default the
8-dot-Braille display is set to off. You can switch this option to 8-dot-
Braille mode by pressing "Space" key. You can toggle this option on or
off by pressing "F1-down scroll button" while you are using another
program in the Braille Sense U2, without having to pull up the "Global
options". If you have changed the setting, press "Enter" key to save the
setting. You can also "tab ("Space-4-5")" or "shift-tab ("Space-1-2")" to
the "Confirm" button, and press "Enter." If you do not want to save the
setting, "tab ("Space-4-5")" or "shift-tab ("Space-1-2")" to the "Cancel"
button, and then press "Enter." You can also cancel saving the setting by
pressing "Space-z (dots 1-3-5-6)" or "Space-e (dots 1-5)."

3.2.4 View/input the Grade of Braille

You can choose what grade of Braille you want the Braille display to use
when reading. The shortcut key is "g (dots 1-2-4-5)." The setting choices
are Uncontracted Braille, Contracted Braille, and Computer Braille. You