Copy; Cut - HIMS Braille Sense U2 User Manual

to use this function, press "Space-m (dots 1-3-4)" or "F2" to open the
"Edit" menu, and then press "Enter" on "Start Selection," or you can
press "b ("dots1-2")" in the "Edit" menu to get to this option. While editing
a document, pressing "Enter-b (dots 1-2)" will activate this command.
The end point of the selected text is where you want to place the cursor
after setting the starting point. For example, if you have typed the word,
"mother" in a document, and you want to select the word "mother," you
should place the cursor on the letter "m," and then place the cursor
directly after the letter "r." Then, you will have selected the entire word.

5.2.2 Copy

After selecting text in a document, press "Space-m (dots 1-3-4)" or "F2"
to open the menu, and move to "Edit" by pressing "Space-4." Press
"Enter" to open the "Edit" menu. Press "Space-4" to move to "Copy" and
then press "Enter," or press "c (dots 1-4)" in the "Edit" menu. While
editing a document, pressing "Enter-c (dots 1-4)" will activate this
command.
When you copy the selected text, it will be copied to the clipboard. The
clipboard is the virtual space that is used for storing copied data
temporarily. However, if you decide to copy new text that you have
selected, the data in the clipboard that you copied before will be erased,
and the selected text that you have just copied will replace the
previously selected text that was on the clipboard.

5.2.3 Cut

To cut a selection of text, press "Space-m (dots 1-3-4)" or "F2," and
press "Enter" on "Edit" to enter into the "Edit" menu. Move to "Cut" by
pressing "Space-4" repeatedly, and then press "Enter" on "Cut," or press
"x (dots 1-3-4-6)" in the "Edit" menu (which is the short cut) to cut your
selected text. While editing a document, pressing "Enter-x (dots 1-3-4-
6)" will activate the "Cut" command.