HIMS Braille Sense U2 User Manual page 201

19) Press "Space-4" to move to "Save mail copies in sent mailbox".
When you send e-mail, you can set the Braille Sense U2 to keep
e-mail message in sent mailbox or not. Press "Space" to change
"Yes" to "No", and press "Enter".
20) Press "Tab (Space-4-5)", move to "Use signature". The default
value is "No". If you want to attach your signature in mail, press
"Space" to change "Yes" to "No".
21) Press "Tab (Space-4-5)", move to "Signature".
22) Press "Enter" on the "Signature".
23) It will be appeared "Signature:" multi edit box. You can type your
signature in here that you want to use.
24) Press "Tab (Space-4-5)", move to "Confirm".
25) Press "Enter" on the "Confirm".
26) This will save the signature, and you will be returned to the
"Signature" button. You can cancel by pressing "enter" on "Cancel"
by pressing "tab ("Space-4-5")" after typing-in a signature.
27) Press "tab ("Space-4-5"), and press "enter" on "Confirm."
If you execute like the above, you can use signature when you send an
email. And also you can use different server when you send or receive
emails.
8.1.2.2 Checking added service list
The following is the method to check the added service information:
1) Press "Space-M (dots 1-3-4) to call up the menu.
2) Press "Space-4" move to "Tools".
3) Press "Enter" on the "Tools" or press "T (dots 2-3-4-5)"
4) It shows "Accounts manager".
5) Press "Enter" on the "Accounts manager".
6) Press "Space-4" or "Space-1" to move to the desired service in the
service list.
7) If the desired service is displayed, press "Enter". Or "Tab (Space-
4-5)" to move to the "Information", and then press "enter."