Input/Search For Control Character - HIMS Braille Sense U2 User Manual

w: dots 2-4-5-6
x: dots 1-3-4-6
y: dots 1-3-4-5-6
z: dots 1-3-5-6
left brace: dots 2-4-6
vertical bar: dots 1-2-5-6
right brace: dots 1-2-4-5-6
tilde: dots 4-5

2.8.2 Input/search for Control character

Control character is a code in a character set, which does not in itself
represent a written symbol in computing. For example, all entries in the
ASCII table below code 32 such as Form Feed (FF), TAB, and Carriage
Return (CR). In the Braille Sense U2, you can input or search the control
character in the Braille documents.
1) Inputting the Control character
The control character can be input only in the Braille documents.
Inputting the control character in the Braille documents, follow these
steps below.
(1) While opening the Braille document, press "Space-x (dots 1-3-4-
6)" and "control character" will be announced.
(2) Input the control character. For example, pressing "l (dots 1-2-3)"
for Form Feed (FF) and "i (dots 2-4)" for TAB in alphabetic order.
Pressing dot(s) for each control character except dot-7 and 8.
(3) The control character will be inputted in the Braille documents.
2) Searching for the Control character
The control character can be searched as well in the Braille documents.
Searching for the control character, follow these steps below.
(1) While opening the Braille document, press "Space-f (dots 1-2-6)".
(2) "Text to find" will be displayed.
(3) Press "Space-x (dots 1-3-4-6)" and "control character" will be
announced.