HIMS Braille Sense U2 User Manual page 45

word processor. The "n" is the shortcut key and "Enter-n" is the hotkey. It
is important to note that not all shortcut keys work from anywhere in the
Braille Sense U2; some commands will only work while you are in a
specific program. For example, if you want to activate the "new
document" option in the word processor. You cannot press "Enter-n (dots
1-3-4-5)" in the "program" menu to activate this option. You must be in
the word processor program in order for "Enter-n (dots 1-3-4-5)" to
activate the "new document" option.
You can also move to the next menu item by pressing "Space-4." You
can move to the previous menu item by pressing "Space-1." When you
want to move to the first item of the menu, you can press "Space-1-2-3."
If you would like to move to the last item of the menu, you can press
"Space-4-5-6." The corresponding menu name will be displayed on the
Braille display, and the menu name will be spoken through the TTS (text
to speech) engine. If you want to listen to the name of the menu again,
press "Space-r (dots 1-2-3-5)." Once you move to a menu item that you
want to execute, press "Enter" in order to execute the menu. By pressing
"Enter," you will move to the sub menu. If there is no submenu, the
Braille Sense U2 will execute the command from the menu. This process
is called "menu selection." You may also move to any menu or execute
any menu by pressing an initial spelling of the menu.
Sometimes, if a menu is executed by pressing "Enter," the lower-level
menu is displayed. In this case, the right direction arrow sign (->) is
displayed after the name of the corresponding menu on the Braille
display. When this happens, the Braille Sense U2 will say, "pull down."
Or, if a menu is executed by pressing "Enter," the dialog box is displayed.
In this case, the ellipsis sign (...) will be displayed after the name of the
corresponding menu on the Braille display. The Braille Sense U2 will
also speak the message, "common dialog."
Let's begin going through the various menus. First, turn the unit on by
pushing the power switch toward you. Now, bring up the "program" menu.
You can bring up the "program" menu by pressing "F1." The "program"
menu is the top menu in the Braille Sense U2. That is, the "program"
menu is the parent directory for everything, as there are no directories or