Braille Paragraph Layout - HIMS Braille Sense U2 User Manual

This is used to edit the header that will be printed at the top of each
page. Move to "Header," and type in the text that you want to be
printed.
7. Footer
This is used to edit the footer that will be printed at the bottom of each
page. Move to "Footer," and type in the text that you want to be
printed.
8. Distance between lines
This sets the distance between the lines that will be printed. The
default value is set to 150%. The distance can be anywhere from
100% to 300%. If you type in a value that exceeds this range, the
Braille Sense U2 will say "Out of range. Value too large," and wait for
you to type in another value.
9. Confirm / cancel
In order to apply a setting, you need to press "Enter" when "Confirm"
is displayed. If you do not want to apply a setting, you need to press
"Enter" when "Cancel" is displayed. If you press "Enter" on cancel,
you will be taken out of the menu. You must press "tab ("Space-4-5")"
or "shift-tab ("Space-1-2")" to get to the Confirm and Cancel buttons.

5.5.3 Braille Paragraph Layout

In order to call up the "Braille Paragraph Layout," press "Space-m (dots
1-3-4)" or "F2" while you are editing a document. Then, press "Enter" on
"Layout," or press "l (dots 1-2-3)" while in the "Layout" menu (which is
the short cut), and then select "Braille Paragraph Layout." Or, you can
press "BackSpace-1-2-4-6." The changed layout will be applied only to
the selected paragraph. These settings are not applied to other
paragraphs.
You can navigate between the menu items by pressing "Space-1" or
"Space-4." Move to the "Confirm" or "Cancel" by pressing "tab" ("Space-
4-5" or "F3"). You can skip an item by pressing "Space-4" if you do not
want to change the default setting.
In this setting, you can set the following items: