Setting Add Address Fields - HIMS Braille Sense U2 User Manual

case, you should press "dot 6" to enter the comma in computer Braille or
"dot 2" in grade 1 Braille.
When you enter a home page address or an e-mail address, you should
enter the information using computer Braille. For the @ (at sign), you
should press "Space-u (dots 1-3-6)" and then "dot 4." A period or dot (.)
in a home page address (or an e-mail address) should be entered as
"dots 4-6." A colon (:) can be typed in using "dots 1-5-6" and a slash (/)
can be typed in using "dots 3-4."
By pressing "tab ("Space-4-5")," you can get to the "Memo" field. You
can type in multiple lines of text in the "Memo" field. When you want to
start a new line of text, you should press "Enter."
When you are done entering information for a record, you can press "tab
(Space-1-2)" until you reach the "Confirm" button. Then, press "Enter" on
"Confirm."

6.3.2 Setting Add Address Fields

"Set Address Fields" enables you to select one of the 22 fields to be
shown when you enter contact information. There are 22 fields in a
record, but you may not want to enter information in every one of the 22
fields. You can use "Set Address Fields" to select only the fields that you
need.
To use this function, press "Space-m (dots 1-3-4)" or "F2" to bring up the
menu, and then select "Set Address Field," or press "o (dots 1-3-5)"
(which is the short cut), and then press "Enter." Or, you can press
"Enter-o (dots 1-3-5)" in the "Add Address" dialog box.
On the right side of each field name, "used" or "unused" is displayed.
The default value is set to "used." In order to toggle the value, press
"Space."