Automatic Spell-Check; Default Document - HIMS Braille Sense U2 User Manual

3.2.37 Automatic spell-check

You can choose whether the Braille Sense U2 will check spelling or not.
This option is available in "multi edit boxes" in programs such as the
schedule manager, address manager, e-mail messages, the word
processor, etc. The short cut key for this option is "c (dots1-4)."
By default this setting is set to "Off" which will not check your spelling. If
you want to check spelling, press "Space" to toggle the option to "On"
and press "Enter." Or, press "tab (Space-4-5)" to move to the "Confirm"
button, and press "Enter."
If you set the option to "On" and enter a misspelled word, you will hear a
beep sound. You will hear a beep sound, even though you shut "Off" the
audio alert.
If you do not want to save the changed setting, press "tab (Space-4-
5)" to move to the "Cancel" button, and press "Enter." You can also
cancel saving the setting by pressing "Space-z (dots 1-3-5-6)" or
"Space-e (dots 1-5)."

3.2.38 Default Document

This function is used to set the default document type applied when you
create a new document using the word processor on the Braille Sense
U2. The shortcut key for this option is "q (dot 1-2-3-4-5)". When you
create a new document in the "word processor", "Braille document" (.brl
file) is selected as the file type by default. You can change the default
setting using this option.
You can choose between "Sense document", "Braille document," and
"Text document." By default, it is set to "Braille document." Press
"Space" to toggle through the three settings, and press "Enter," or press
"tab (Space-4-5)" to move to the "Confirm" button, and press "Enter," to
save the changed setting.