Lan Setup; Setup Wireless Lan - HIMS Braille Sense U2 User Manual

If you want to activate "Setup internet," press "Enter" on "Setup internet"
in the "Utilities" menu, or press "I (dots 2-4)" in the "Utilities" menu. You
can move through the "Utilities" menu items with "Space-1" or "Space-4."
If you want to access to Internet with the Braille Sense U2, you must set
the Internet settings at "Setup internet" that is one of the submenus of
"Utilities" menu.
Or, if the PC in which the Active Sync program is installed is connected
to Internet and the Braille Sense U2 is connected to that PC, then you
can connect the Braille Sense U2 to Internet.
The functions of this menu are explained in greater detail in the following
sections.

17.10.1 LAN Setup

If you are going to set up a LAN, you should first connect a LAN cable to
the Braille Sense U2. In this setup, you can decide whether you will use
the automatic or manual setup to setup your IP configuration. If you want
to set it up automatically, press "Enter" on "Setup IP: Automatic." Then, it
will be set up automatically. For the automatic setup, your host server
should provide DHCP service (Dynamic Host Configuration Protocol).
If you want to set up your IP configuration manually, move to "Manual"
by pressing "Space-1" from the "setup IP: Automatic," and press "Enter."
Then, you will find the following: "IP," "Subnet mask," "Gateway," and
"Primary DNS." These settings require specific information. Please
contact your Internet service provider for the right information. To type in
the information, you should use computer Braille, and after typing in the
information, you can move to the next item by pressing "Space-4."
Finally after completing the "Primary DNS," press "Enter." Then, you will
see the message "setting completed." You will be returned to "Setup
internet" with your information saved. You can then use E-mail, MSN
messenger or the Web browser.

17.10.2 Setup Wireless LAN