Paste; Delete; Delete Blank Lines - HIMS Braille Sense U2 User Manual

The difference between "Cut" and "Copy" is that if you execute the "Cut"
command, the text that has been selected will be moved to the clipboard
and the selection in the document will be cut. However, the "Copy"
command will copy the selection to the clipboard, and the text that has
been selected will not be erased from the document.

5.2.4 Paste

To paste selected text to the clipboard, press "Space-m (dots 1-3-4)" or
"F2," and then press "Enter" on "Edit" to enter into the "Edit" menu. Move
to "Paste" by pressing "Space-4" repeatedly and then press "Enter" on
"Paste," or press "v (dots 1-2-3-6)" in the "Edit" menu (which is the short
cut) to paste the selected text from the clipboard. While editing a
document, press "Enter-v (dots 1-2-3-6)" to paste the text from the
clipboard.

5.2.5 Delete

To delete text that has been selected, press "Space-m (dots 1-3-4)" or
"F2," and then press "Enter" on "Edit" to enter into the "Edit" menu. Move
to "Delete" by pressing "Space-4" repeatedly, and then press "Enter" on
"Delete," or press "d (dots 1-4-5)" (as a short cut) in the "Edit" menu to
delete the selected text. When you are editing a document, you can
press "Space-d (dots 1-4-5)" to delete text that you have selected.

5.2.6 Delete Blank Lines

In order to delete blank lines, you must select the area of the document
where you want the blank lines to be deleted from. Once this has been
done, press "Space-m (dots 1-3-4)" or "F2," and press "Enter" on "Edit"
to enter into the "Edit" menu. Then, use the up and down arrows
("Space-1" or "Space-4"), and press "Enter" on "Delete Blank Lines," or
press "l (dots 1-2-3)" as a short cut, while in the "Edit" menu. If you want
to delete an empty line while you are editing a document, press
"Backspace-e (dots 1-5)," which is the hot key for "Delete Blank Lines."