Start Time; End Date; End Time - HIMS Braille Sense U2 User Manual

7.4.2 Start time

"Start time" is the second field in the "Add Schedule" dialog box. Here
you can set the time when your appointment starts. By default, this field
shows the current time, which can be changed in the "Set Time and
Date" in the "Utilities" program. If you set the time format as "12 hour" in
this option, the time will be displayed in "am/pm" format. Otherwise, the
time will be displayed in 24 hour format. If you have set the time format
to "12 hour," you will want to press "Space-x (dot 1-3-4-6)" to change
between am and pm. After you have entered the time, press the "tab
(Space-4-5)" to move to the next field. If you press "Enter" by accident
right after entering this field, you will get the message, "no subject," and
then the focus will move to the "Subject" field.

7.4.3 End date

The "End date" is the third field in the "Add Schedule" dialog box, and
here you can set the date when the appointment ends. By default, the
same date as the date you set in the "Start date" field is displayed. If you
want to use this date, you can press "tab (Space-4-5)" to move to the
next field. If you want to enter a new date, you should type
month/day/year in this order. After you have changed the date, you can
press "tab (Space-4-5)" to move to the next field. If you press "Enter" by
accident right after entering the date, you will get the message, "no
subject," and the focus will move to the "Subject" field.

7.4.4 End time

"End time" is the fourth field in the "Add Schedule" dialog box. Here you
can set the time when the appointment ends. By default, the same time
as the time you set in the "Start time" field is displayed. If you want to
change the time, type the time as you would in the "Start time." After
setting the time, press "tab (Space-4-5)" to move to the next field. If you
press "Enter" by accident right after entering the time, you will get the
message, "no subject," and then the focus moves to the "Subject" field.