HIMS Braille Sense U2 User Manual page 244

address at "Host add: (host address)," the displayed host address will be
erased, and the new host address will be displayed. But, if you press the
"cursor routing key" at the position where you want to modify the
displayed address, that address will be modified where you modify it.
When "Host: (registered host address) 1/1" is displayed, you can add it
by pressing "a (dot 1)" or pressing "Tab (Space-4-5)" to move to the
"Add" button, and then press "Enter." You can check the registered host
addresses by pressing "Space-1" or "Space-4."
When you register a subject, e-mail address, or host as spam e-mail,
you may make a mistake while you are typing in a subject, e-mail
address, or host. In this case, you need to modify the subject while
typing them in.
Please refer to the following correction methods:
1. In order to delete the current letter, press "Space-d (dots 1-4-5)"
2. In order to delete the previous letter, press "Backspace."
3. In order to delete the current line, press "BackSpace-1-4." Then,
"Delete line: yes" will be displayed. Press "enter" to delete the line. Or,
if you do not want to delete the line, press "Space" to toggle "Yes" to
"No," and then press "enter."
If you want to cancel setting spam at the "Add dialog box," press "Tab
(Space-4-5)" to move to the "Cancel" button, and press "Enter." Or, just
press "Space-e (dots 1-5)" or "Space-z (dots 1-3-5-6)."
8.5.3.2 Modifying Spam Registration
In order to modify a "Subject" that has been registered, do the following:
1) Press "Space-m (dots 1-3-4)" or "F2" to call up the menu while
you are in the "inbox."
2) Press "Space-4", move to the "Tools".
3) Press "Enter."