Voice Settings - HIMS Braille Sense U2 User Manual

"open DAISY" dialog box.
Namely, you can move to up and down by pressing "previous" and "next"
button in list of "Open DAISY" dialog box. And you can select and
unselect by pressing "record" button. If you press "stop" button, you can
move to upper folder. And if you press "play" button, you can play the
selected file in file list of "Open DAISY" dialog box.
In order to use this function, you must set the audio mode switch to
"DAISY mode."

12.2.2 Voice Settings

In the "Voice Settings," you can set the Daisy player voice parameters.
To execute voice settings, follow these steps:
(1) Press "Space-m (dots1-3-4)" or "F2" to call up the menu.
(2) Move to "Voice Settings," which is located under the "File" menu
and press "Enter". Or press "s (dots 2-3-4)".
(3) Also you can directly activate the "Voice Settings" by pressing
"Enter-s (dots 2-3-4)."
It will open the "Voice Settings" dialog box.
In the dialog box,
1) DAISY play type(It will show while playing text+audio DAISY)
2) Voice control
- Set speed
- Set volume
- Set to control information of contents
3) Confirm
4) Cancel
You can move between the four controls with "Tab (Space-4-5)" or
"Shift-Tab (Space-1-2)." In "voice control," you can move between "Set
speed", "Set volume" and "Set to control information of contents" with
"Space-1" or "Space-4".
If you cancel this function, press "Space-e (dots 1-5) or "Space-z (dots
1-3-5-6)".