Display Network Status - HIMS Braille Sense U2 User Manual

connect names the default connection. If you make a connection the
default connection, that will be the connection that is used to connect to
the Internet first. In "Add," you can manage the connect names in the list.
It has three controls: edit field, a Confirm button, and a Cancel button.
You can move between the three controls by pressing "tab ("Space-4-
5")" or "shift-tab ("Space-1-2")". The edit field contains the following:
Connect name, ID, and Password. You can move between the controls
by pressing '"Space-4" or "Space-1." When in the "Connect name"
control, type in the server host name. In "ID" and "Password," you can
type in what you want in ASCII. After completed filling in the appropriate
information, press "Enter" or press "Enter" on "Confirm" after pressing
"tab ("Space-4-5")" moving. To cancel everything that has been typed in
to the edit field, go to "Cancel," and press "Enter."
In "Modify," you can modify a connect name. If you want to modify a
connection in the "connect list," select the connect name you want to
modify in the list. Then, press "Enter" on "Modify." Or, after you have
selected the connect name, press "Enter-m (dots 1-3-4)." "Modify"
contains the same items as "Add," and the text is typed in the same way.
Using "Delete," you can delete selected connect names. If you want to
delete a connect name in the "connect list," select the connect name you
want to delete in the list, and then press "Enter" on "delete." Or, after you
have selected the connect name, press "Space-d (dots 1-4-5)."
If you want to exit the ADSL setup, press "Space-z (dots 1-3-5-6)," or
press "Enter" on "Close."

17.11 Display Network Status

Using this program, you can check if the Braille Sense U2 is currently
connected to the Internet. This program provides you with the
information about the current connection type, the current IP of the unit,
subnet mask, gateway, and MAC address. To run this program, press
"Enter" on "Display Network Status," or press "n (dots 1-3-4-5)" in the
"Utilities" menu. If you start the program, a list of information about the
connection type and address will be displayed. If you press "tab (Space-