HIMS Braille Sense U2 User Manual page 114

The open command opens a document that has already been saved on
to a disk. Select "Open" on the "File" menu, or press "Enter-o (dots 1-3-
5)." You can access the "File" menu by pressing "Space-m (dots 1-3-4"),
or by pressing "F2." Then, a dialog box pops up, so that you can open a
file. The "Open dialog box" is a tool that helps you find documents that
you want to edit and read. It consists of the "file list" (which shows the list
of files or folders), "File name" (to type in a file name directly), "Type"
(which changes the file format when opening a document), a "Confirm"
button (for confirming the selection), and a "Cancel" button (for canceling
the selection). In order to move between these controls, press "tab
("Space-4-5")" or "shift-tab ("Space-1-2")." If the "Open dialog box" is
executed, "File name:" is displayed first. If "File name:" is displayed, then
type in a file name that you want to open, and press "Enter." The file
name should be typed in ASCII Braille. The Braille Sense U2 will look for
that file in the "/flashdisk/My Documents" folder. If there are files that you
used recently, you can scroll through them by pressing "Space-4." The
file names that were opened recently are displayed one by one by
pressing "Space-4." If the file that you want to open is selected press
"Enter" to open it. In order to move to the previous file name in the list,
press "Space-1." In order to open a file with a different file format, press
"tab ("Space-4-5")" to move to the file format selection, and then press
the up arrow ("Space-1") or down arrow ("Space-4") to select a desired
file format. You can find and open a desired file from the file list without
typing in the file name directly in the "File name:" box. Press "tab
("Space-4-5")" several times to move to the "file list," and then select a
desired file. You can also move to the "file list" by pressing "shift-tab
("Space-1-2")" when you are at the "File name:" dialog box. The files in
the "file list" have the file format that was selected in "file type."
You can select a file that you want by using the up and down scroll
buttons, and you can open the file by pressing "Enter." If you select a
folder and press "Enter," you will see the list of files in that folder.
If you want to access a file that is on a compact flash card, or USB
memory stick, you can access the file in the "Open" dialog box by first
moving to the "file list" by pressing "shift-tab ("Space-1-2")" or "Space-