HIMS Braille Sense U2 User Manual page 348

3) After you have selected the file, press "Space-m (dots 1-3-4)" to
open the menu, and then use "Space-1" or "Space-4" to move to
"Retrieve File," and press "Enter." You can also activate this
function without calling up the menu by press "Enter-r (dots 1-2-3-
5)."
4) Just like copying and pasting, you will hear a sound that
indicates that the Braille Sense U2 is working. If the file is larger
than 300 KB, you will also hear the progress meter each time an
additional 10% has been completed. If the file is less than 300 KB,
then you will only hear the sound, and not the progress meter.
When the transfer has completed, you will hear, "xxx file
retrieved," where xxx is the name of the file. If the file does not
transfer, you will hear, "xxx file not retrieved." Once all of the files
have been transferred completely, you will hear, "Retrieve
completed," and you will be returned to the remote folder list.
13.2.3.4 New Folder
The "New Folder" function will allow you to create a new folder in the
local folder list or the remote folder list. To create a new folder, perform
the following steps:
1) After the FTP service has connected, navigate to the local or
remote folder list and move to the folder where you want to make
new folder. You can move between the "remote folder list" and
"local folder list" by pressing "Enter-o (dots 1-3-5)." And how to
move among the items in the folder list is the same as how to
move in the File manager.
2) Press "Space-m (dots 1-3-4)" to open the menu, and then use
"Space-1" or "Space-4" to navigate to "New Folder," and press
"Enter." Or, you can activate this function without calling up the
menu by pressing "Enter-f (dots 1-2-4)."
3) You will then see an edit box that says, "New folder name:."
Type in the new folder name using ASCII characters, and then
press "Enter." If the folder is created successfully, you will hear,
"xxx folder created," where xxx is the name of the folder. You will