Settings - HIMS Braille Sense U2 User Manual

"Printer" is almost the same as "Embosser." After you input the value as
in embosser dialog box, press "tab ("Space-4-5")," and then "Print: Yes"
is displayed. If "Enter" is pressed, printing will start. But, if you press
"Space" to move to "No," and press "Enter," printing will be canceled,
and the Braille Sense U2 will return you to the open document.
Note that the Braille Sense U2 will work with all HP printers (level 3 PCL
or higher), and with HP-compatible printers.

5.1.7 Settings

If you want to change the environment, press "Space-m (dots 1-3-4)" or
"F2," and press "Enter" on the "File" menu in order to enter into the "File"
menu. Move to "Settings (e)" by pressing "Space-4" repeatedly, and then
press "Enter" on "Settings," or just press "e (dots 1-5)." While editing a
document, pressing "Enter-e (dots 1-5)" will open the "Settings" menu.
When this menu is opened, a dialog box is displayed, which contains the
followings: the "settings" list, "Default folder" button, "Confirm" button and
a "Cancel" button. You can move between controls by pressing "tab
("Space-4-5")" or "shift-tab ("Space-1-2")". And you can move between
setting items in list by pressing "Space-1" or "Space-4."
The following are the setting items that can be changed:
1. View format character (Yes/No): If this option is set to "Yes," all of the
format characters are displayed. If you want to change this option,
use "Space" to toggle. Formatted characters will be marked with the
"carriage return ($p)", and the "mark sign ($pl)."
2. Reading unit (Line/Paragraph): It sets the moving unit when "Space-
1" or "Space-4" is pressed while you are reading a document. If this
option is set to "Line," "Space-1" moves line by line. If this option is
set to "Paragraph," "Space-1" moves paragraph by paragraph. In
order to toggle between "Line" and "Paragraph," press "Space."
3. Read only (Yes/No): If this option is set to "Yes," the document
cannot be modified. This setting is used in order to protect the