HIMS Braille Sense U2 User Manual page 469

navigate among these controls by pressing "tab ("Space-4-5")" or "shift-
tab ("Space-1-2")".
The "Advanced" common dialog box contains "profile list," "Connect"
button, "Add" common dialog button, "Remove" button, "Properties"
common dialog button and "Close" button controls.
1. "profile list": Here you will see the profile lists that you have added.
You can move through the list by pressing "Space-4" or "Space-1."
2. "Connect" button: It tries to connect the wireless using the selected
profile by pressing the button.
3. "Add" common dialog button: You can add a profile here. "Add
common dialog" has the 10 controls.
1) "Setup IP: Automatic" combo box: You can switch between
automatic and manual by pressing "Space-4" or "Space-1." If you
select "Manual," you will need to enter your IP address, subnet
mask, gateway IP address, and DNS IP address by yourself. You
can move between these computer edit boxes by pressing
"Space-4" or "Space-1." Press "tab ("Space-4-5")" to move to the
next control.
2) "Network name (SSID)" computer edit box: The edit box is empty
and you can type in network name you prefer.
3) "Network mode" combo box: Here you can select between
"Infrastructure," and "802.11 ad-hoc" mode by pressing "Space-1"
or "Space-4."
4) "Network authentication mode" combo box: Here you can select
between "Open," "Shared," "WPA-PSK," and "WPA2-PSK" by
pressing "Space-1" or "Space-4."
5) "Data encryption" combo box: Here you can select the data
encryption method by pressing "Space-1" or "Space-4." If you
select "Open" or "Shared" in network authentication mode, you can
choose between "Disable" and "WEP." And if you select "WPA-
PSK" or "WPA2-PSK" in network authentication mode, either
"AES" or "TKIP" can be selected in the "Data encryption" combo
box.