Go To Previous Page; Go To Next Page; Set Mark - HIMS Braille Sense U2 User Manual

the "Go To" menu. Then, when the Braille Sense U2 says, "Move to
page number:" you can type in the page number followed by the line
number. For example, to move to the 3
type "20 3," or you could type "f20 3." When you use the command of the
"Go To Location" function, you cannot use the "+" or "-" sign. You can
only go directly to the page and line number.

5.3.5 Go to Previous Page

The "Go To Previous Page" command allows you to move to the page
that is located before the page you are currently on. To execute this
command, press "Space-m (dots 1-3-4)" or "F2," and move to "Go To" by
pressing "Space-4." Then, press "Enter" on "Go To." Move to "Go To
Previous Page" by pressing "Space-4," and then press "Enter," or press
"Space-1-2-6" or "F1-F2" while you are in the document. Once you have
activated the "Go To Previous Page" function, the Braille Sense U2 will
go directly to the previous page.

5.3.6 Go to Next Page

The "Go To Next Page" command allows you to move to the page that is
located after the page you are currently on. To execute this command,
press "Space-m (dots 1-3-4)" or "F2," and move to "Go To" by pressing
"Space-4." Then, press "Enter" on "Go To." Move to "Go To Next Page"
by pressing "Space-4," and then press "Enter." Or, you can press
"Space-3-4-5" or "F3-F4" while you are in the document. Once you have
activated the "Go To Next Page" function, the Braille Sense U2 will go
directly to the next page.

5.3.7 Set Mark

The "Set mark" command marks a position in the document that you
want to use later. To execute this command, press "Space-m (dots 1-3-
4)" or "F2," and move to "Go To" by pressing "Space-4." Then, press
"Enter" on "Go To." Move to "Set mark" by pressing "Space-4," and then
press "Enter," or press "m (dots 1-3-4)" in the "Go To" menu, which is the
rd
line on the 20
th
page, you would