HIMS Braille Sense U2 User Manual page 390

control pressing "Tab"(F3 or "Space-4-5") or to the previous control
pressing "Shift-Tab"("Space-F3" or "Space-1-2").
1) Followers: Your followers appear. And then select follower who you
want to send Direct Message.
2) Next list: Whenever you launch this function, it can load lists by 32
followers. Press "Enter-n (dots 1-3-4-5)" or "Enter" key on this button
3) Message: As edit box, you can type message on this box.
4) Characters: As a status bar, it displays current characters and
maximum characters like 'Characters: 0/140T'.
5) Send: You can send "Direct Message" by this button. Press "Enter-s
(dots 2-3-4)" or "Enter" key on this button.
6) Close: You can close "Send Direct Message" dialog box and go to the
previous status. Or you can use "F4" or "Space-e (1-5)".
The followings are way to send "Direct Message".
(1) If you launch "Send Direct Message" dialog box, 'followers' is
displayed. Within in 'followers', you can select 'follower' using
"Space-4" or "Space-1".
(2) When there is no 'follower' which you want on the list, if you call
up the 'next list' pressing "Enter-n (1-3-4-5)", you can find the
desired 'follower'.
(3) Move to the "Message" edit box by pressing "Tab".
(4) Write a message and press "Enter".
(5) "Sending a Message" message is displayed and Direct Message
is sent.
(6) If send is successful, "Message transfer is completed" message
will be displayed and you will go to the 'followers' within "Send
Direct Message" dialog box.
16.2.7.2 Received Direct Message
This function allows you to view Direct Message.
In order to call up the menu, press "Backspace-r (dots 1-2-3-5)" or
launch "Received Direct Message" menu located on the sub menu of
"Tweets", after calling up the menu.