Go To Location - HIMS Braille Sense U2 User Manual

"No." If you want to change the value, press "Space." Pressing
"Space" will toggle between "No" and "Yes."
5. Replace
You may want to replace only one piece of text. Or, you may want to
replace all the texts that coincides with the text that you typed in the
"Text to find" field. You can set it in the "Replace" field. There are two
choices: "Once" and "All." You can toggle between the two choices by
pressing "Space."
6. Confirm and Cancel
Pressing "Enter" on "Confirm" will start finding and replacing text. If
there is no text that coincides with the text that was typed in, "Not
found." is displayed, and the function is canceled. Pressing "Enter" on
"Cancel" will cancel the "Replace" function.

5.3.4 Go to Location

The "Go to Location" command moves rapidly to a specific location. You
can move to a specific page, paragraph, or line. To execute this
command, press "Space-m (dots 1-3-4)" or "F2," and move to "Go To" by
pressing "Space-4." Then, press "Enter" on "Go To." Move to "Go To
Location" by pressing "Space-4," and then press "Enter." While editing a
document, press "Enter-l (dots 1-2-3)" to activate this function. If "Go to
Location" is executed, the word processor says, "Move to page number."
If you type in a number here, the Braille Sense U2 will take you to the
page number that corresponds with the number you have just typed in.
You can also type the letter "f (dots 1-2-4)" before the number. This will
tell the Braille Sense U2 that you are looking for a page number, and not
a paragraph, or, line number. Type in the number of the page you want
to move to without the PLUS sign or minus sign, and then press "Enter."
The word processor will jump from start of the document to the specific
page at once. If you want to move forward from your current location, put
the PLUS sign in front of the number and letter. For example, if you want
to move forward five pages, you would type "+f5." If you want to move
backward from your current location, put the minus sign in front of the
number and letter. If you want to move to the previous page, type "-f,"