Print - HIMS Braille Sense U2 User Manual

5.1.6 Print

The "Print" command is used to print the current document in ink or
emboss it in Braille. If you want to execute this command, press "Space-
m (dots 1-3-4)" or "F2," and press "Enter" on the "File" menu. Then,
move to "Print" by pressing "Space-4," and then press "Enter," or just
press "p (dots 1-2-3-4)." While editing a document, the hot key for
printing is "Space-p (dots 1-2-3-4)." There are two lower level menus for
the "Print" menu. One is for printing with an ink printer, and the other is
for embossing in Braille. Remember that you can move between the
menu items by using "Space-1" or "Space-4."
1. Embossing in Braille
Open the document that you want to be embossed. Press "Space-m
(dots 1-3-4)" to activate the menu. Locate "print" in the "File" menu and
select "Embosser," or press "b (dots 1-2)." If you select "Embosser (b)"
above, the "Embosser dialog box" is opened. Here you can type in the
page number where you want the embossing to start, and type in the
end page number, where you want the embossing to stop. The following
items are in the dialog box.
1) Start page number
This is the beginning page number to be embossed. The default page
number is set to 1. You can change the value of the page number, by
typing in the value that is desired. You can move to the next selection
item, which is the "End page number" by pressing "Space-4."
2) End page number
This is the ending page number that is to be embossed. The default
value is set to 100000. It means that the document will be embossed to
the end of the document, unless the document exceeds 100000 pages.
In order to change the value, input the number of the ending page. You
can move to the next selection item (which is the "Number of copies") by
pressing "Space-4."