HIMS Braille Sense U2 User Manual page 129

5. Current word: check just the word where the cursor is located. You
can move from one item to the next by pressing "Space-1" or "Space-
4."
When you press "Enter" on the "Custom dictionary" dialog, the following
items will be displayed:
1. List: it shows the words that are registered in the custom dictionary.
(Example: Braille 1/20). If there are no words registered, "no items"
will be displayed.
2. Add word (backspace-a): if "Enter" is pressed on this button, "Add
word:" will be displayed. If you want to add a word, press "Enter" after
you enter the new word. Then, the new word is added and the Braille
Sense U2 exits to the "Add word" button.
3. Modify word (backspace-m): select the word to be modified on the
"list" and then press "Enter." The "Modify word:" message is displayed.
Input the correct word that will replace the selected word and then
press "Enter" in order to modify the selected word. The "Modify word"
button will be displayed again after the Braille Sense U2 modifies the
selected word.
4. Delete word (Space-d): select the word to be deleted on your "list"
and press "Enter" in order to delete the selected word.
5. Close: this command closes the dialog box. You can move from one
item to the next item by pressing "tab (Space-4-5)" or "shift-tab
(Space-1-2)."
When you press "Enter" on the "Options" dialog, the following items will
be displayed:
1. Always suggest recommended word: if this option is set to "On," the
Braille Sense U2 will suggest a word if the word that is encountered is
not in the dictionary. The default is set to "On." If the option is set to
"Off," the Braille Sense U2 will not recommend a word. In order to
toggle between "On" and "Off," press "Space."
2. Use main dictionary only: if this option is set "On," the spell checker
will not look up any words in the "custom dictionary." It will only use
the main dictionary. The default value is set to "Off," and you can