HIMS Braille Sense U2 User Manual page 352

check box that says "Show the Bluetooth Icon in the Notification
Area."
2) Press the "up or down arrow" keys until you get to "Open
Bluetooth settings."
3) Press "Enter."
4) Select the Device tab control. You may need to press Ctrl-Tab in
order to select this tab control.
5) Tab to the Add button.
6) Press "Enter."
7) Press "Space" to check the checkbox for "My device is setup
and ready to be found."
8) Press enter."
9) The XP machine will find the Braille Sense U2, and it will be
called "Windows CE." Remember that the Braille Sense U2 must
be turned on in order to be found as mentioned above. If you
forgot to turn the Braille Sense U2 on, leave it turned on, exit the
Bluetooth settings, and start at step number 1 above.
10) Press the "down arrow" key to focus Windows CE.
11) Tab to the Next button.
12) Press "Enter."
13) Press "down arrow" to focus the radio button, "Let me choose
my own passkey." Focus will automatically be put in the edit box,
and you may hear a tool tip that says, "We recommend using a
passkey that is 8 to 16 digits long." You should type your passkey
here. For example, you might type, "1111."
14) Press "Enter." Windows will then begin exchanging the passkeys,
and a new dialog will appear on the computer.
15) The Braille Sense U2 will then ask for the passkey by saying,
"Computer Edit Box PIN code:" Using the same passkey that was
typed in to the computer, type in the same passkey on the Braille
Sense U2 and press "Enter" on the Braille Sense U2.
16) The computer will say the message, "Found new hardware" and
the final dialog should appear on the computer. Remember that
you can press "ctrl-shift-w" to have the entire dialog read using
Window-Eyes. The dialog should display that the Bluetooth device
was successfully set up. It is very important to note the COM ports
for the outgoing COM port and the incoming COM port. For