currently editing. To execute this command, press "Space-m (dots 1-3-
4)" or "F2," and move to "Go To" by pressing "Space-4." Then, press
"Enter" on "Go To." Move to "Go To Previous Document" by pressing
"Space-4," and then press "Enter." Or, you can press "shift-tab (space -
1-2)" while you are editing a document to go to the previous document.
5.3.10 Go to Next Document
If you have multiple documents open, you can go directly to the next
document that is open. To execute this command, press "Space-m (dots
1-3-4)" or "F2," and move to "Go To" by pressing "Space-4." Then, press
"Enter" on "Go To." Move to "Go To Next Document" by pressing
"Space-4," and then press "Enter." Or, you can press "tab (Space-4-5)"
while you are editing a document to go to the next document.
5.4 Read Menu
The "Read" menu reads the document in voice and in Braille when the
user has opted to use read in voice and Braille. In order to call up the
"read menu," press "Space-m (dots 1-3-4)" or "F2," and then press "r
(dots 1-2-3-5)." The submenus of the "Read" menu are "Read Selected
Text," "Read Beginning Of Selected Text," "Read From Beginning To
Cursor," "Read From Cursor To End," "Auto Scroll," and "Read Status."
5.4.1 Read Selected Text
The "Read Selected Text" command allows you to have the Braille
Sense U2 read text that you have in a selection. To execute this
command, press "Space-m (dots 1-3-4)" or "F2," and move to the "Read"
menu by pressing "Space-4," and then press "Enter," or press "r (dots 1-
2-3-5)" to call up the "Read" menu. Press "Enter" on "Read Selected
Text" in the "Read" menu. While editing a document, you can press
"BackSpace-b (dots 1-2)" to activate the "Read Selected Text" function.
Although you activate this function, the cursor location will not move to
the selected text. The cursor will stay where you have activated "Read
Selected Text."