HIMS Braille Sense U2 User Manual page 200

4) It shows "Accounts manager" in LCD and Braille display.
5) Press "Enter" on the "Accounts manager".
6) It shows "Account name". Without calling up menu, by pressing
"Enter-M (dots 1-3-4)" you can move to this menu.
7) Press "Tab (Space-4-5), move to "Add".
8) Press "Enter" on the "Add" or press "A (dot 1)".
9) Press "Tab (Space-4-5), move to "Advanced".
10) Press "Enter" on the "Advanced".
11) It shows "Use secure POP3 (POP-SSL)". The default value of
this check box is unselect. If the POP3 server uses the "SSL,"
select the check box by pressing "Space."
12) Press "Space-4" to move to "POP3 port number: 110" by default.
Here you can type in another POP3 port number in the computer
edit box.
13) Press "Space-4" to move to "SMTP encryption type". The setting
values are "None", "SSL" and "TLS". If the type of Outgoing SMTP
server uses the "SSL" or "TLS", change the value by pressing
"Space."
14) Press "Space-4" to move to "SMTP port number: 25." This is
also a computer edit box. Here you can type in another SMTP port
number.
15) Press "Space-4" to move to "SMTP username." Here, you can
add another SMTP username if your Internet service provider
requires you to use a different SMTP username. You should use
ASCII to type this in.
16) Press "Space-4" to move to "SMTP password." You can type in
your password that corresponds to the above ID. It should be
typed in using ASCII.
17) Press "Space-4" to move to "Use as default send-from account"
If you want to use the above new username and password that
were set in steps 7 and 8, select the check box by pressing
"Space."
18) Press "Space-4" to move to "Keep mail copies in server". When
you download e-mail from your e-mail server, you can set the
Braille Sense U2 to keep e-mail messages on the server or not.
Press "Space" to change "Yes" to "No," and press "enter" if you do
not want a copy of the email to remain on the e-mail server.