Move To Specific Heading; Find Heading - HIMS Braille Sense U2 User Manual

While playing a DAISY file, you can move heading by heading without
using the "Heading" menu. You can move to the next, previous, first, and
last heading by pressing "Space-5," "Space-2," "Space-2-3," and
"Space-5-6," respectively.
Also you can move to the previous or next heading without calling up the
menu using audio buttons on the front panel. Before you use this feature,
you have to set the audio mode button on the front panel to "daisy
mode." In order to move to previous or next heading, press "previous" or
"next" button for about 2 seconds and release it. Then it will move to the
previous or next heading.

12.5.2 Move to Specific Heading

While playing a DAISY file, you can move specific heading without
calling the menu.
In order to move to specific heading, follow these steps:
1) Press "Enter-h (dots 1-2-5)" while playing a DAISY file.
2) It shows "Current Heading: xx Total heading: yy. Enter the heading
number to move to:".
3) Type heading number that you want to move.
4) Press "Enter".
5) It will move to the selected heading and the DAISY file will start
playing.

12.5.2 Find Heading

You can find any heading you want while playing a DAISY file. Without
using the "Find Heading" menu, you can activate "Find Heading" by
pressing "Space-f (dots 1-2-4)." When you have pressed this hot key,
you will see a dialog box that shows the message, "Heading to find:" You
will also see a "Search direction:," a "Confirm" button, and a "Cancel"
button. You can move between the four items with "tab (Space-dots 4-
5)" or "shift-tab (Space-dots 1-2)."