Subject; Location; Memo; Alarm Time - HIMS Braille Sense U2 User Manual

7.4.5 Subject

"Subject" is the fifth field where you can type in the subject of an
appointment. If you do not enter anything in this field, you will not be
able to save the record. If you press "Enter" after typing in the subject,
the record will be saved, leaving the "Location" and "Memo" field empty,
and the "Alarm time" field set to its default value ("Time of appointment").
If you want to move to the next field, press "tab ("Space-4-5")," instead of
"Enter."

7.4.6 Location

In the "Location" field, you can type appointed location. If you press
"Enter" after typing in the location, the record will be saved, leaving the
"Memo" field empty, and the "Alarm time" field set to its default value
("Time of appointment"). If you want to move to the next field, press "tab
("Space-4-5")," instead of "Enter."

7.4.7 Memo

In the "Memo" field, you can enter detailed information about an
appointment. Here, you can type in more than one line. You can use
most of the editing commands that are used in the "Word processor."
Press "Enter" to enter information on a new line. You can leave this field
blank if you want to. After you finish writing the information, you can
press "tab ("Space-4-5")" to move to the next field.

7.4.8 Alarm Time

The "Alarm time" function allows you to set the time when you will be
notified about an appointment. The alarm is set relative to the
appointment time. For example, you may want the alarm to sound 30
minutes before your appointment, so that you are not late. The default
value for this field is set to "Time of appointment." This means that the
alarm will sound at the same time as you have set for your appointment.
You can set the time in the same way as when you set the appointment