Front Panel - HIMS Braille Sense U2 User Manual

Braille display on a regular computer monitor for sighted people. If you
want to use this port, it will have to be turned on from within the options
menu. This port is very beneficial when using the Braille Sense U2 in
educational settings.
The last thing you will find on the rear side panel of the unit is a
rectangular hole that is for the detachable battery. The battery is
separated from the unit when the Braille Sense U2 is shipped. Insert the
battery into this rectangular slot until you hear a click sound. When you
hear this sound, you will know that the battery is inserted correctly. To
remove the battery from the unit, you will need to locate the latch that is
found on the bottom of the unit. Using your left hand, pull the latch to the
right panel, and then use your right hand to pull the battery out of the slot.

1.2.5 Front Panel

Finally, let's take a look at the front panel of the Braille Sense U2. On the
far left of the front panel, there is microphone jack. You can plug in
microphone. To the right of the microphone jack is headphone jack. You
can plug in stereo headphone jack. To the right of the headphone jack is
slide switch. This slide switch is the audio mode switch. This switch will
be explained in more detail in the next section. Next, to the right of the
slide switch is five buttons in different shapes. The five buttons are for
playback audio and recording sounds. These five buttons will be
explained in the FM Radio, Daisy and Media program sections in this
user manual.
To the right of the five buttons is power switch. This switch will turn the
unit on and turn the unit off. To turn on the unit, push the switch to the
right. To turn off the unit, push the switch to right again.
Congratulations! You are now familiar with the very basic functions of the
buttons and ports that are located on the Braille Sense U2. The rest of
the manual will discuss each function in greater detail to allow you to
maximize the potential of your Braille Sense U2.